Impedance Lab
The purpose of this lab was to measured the impedance of three separate circuits and compare it with our calculated values.
The output current from the 47 Ohm resistor and output voltage 100 Ohm resistor was measured.
This picture is showing the output at 10KHz.
The output current from the 47 Ohm resistor and output voltage from the microH was measured.
This picture is showing the output at 10KHz.
The output current from the 47 Ohm resistor and output voltage from the 0.1 microF was measured.
This picture is showing the output at 10KHz.
Here are the results from the three circuits, including their voltage and current measurements.
Conclusion: Today we went over impedance and admittance, and how to solve for them within circuits involving resistors, inductors, and capacitors.
No comments:
Post a Comment